Image Enhancement

BLC,HLC,3D DNR, Distortion Correction, Defog

Privacy Mask

8 programmable polygon privacy masks

Picture Overlay

LOGO picture can be overlaid on video with 128 × 128 24 bit bmp format.

Image Stabilization

EIS

Interface

Video Output

1 V p-p Composite Output
(75 Ω/CVBS) (Only
for debugging)

Ethernet Interface

1 RJ45 10 M/100 M/1000
M self-adaptive Ethernet port

On-Board Storage

Built-in memory card
slot, support microSD/microSDHC/microSDXC card,
up to 1 TB

Built-in Microphone

Yes, 2 built-in microphones

Built-in
Speaker

Max. power consumption: 1.5 W, max. sound pressure level: 98 dB, speaker range:
10

m

Audio

1 input
(line in), 3.5 mm connector, three-contact, max. input
amplitude: 3.3 Vpp,
input impedance: 4.7 KΩ, interface type: non-equilibrium,

1 output (line out),
3.5 mm connector, three-contact, max. output
amplitude: 3.3 Vpp,

output impedance: 100 Ω, interface type: non-equilibrium,
mono sound

Alarm

2 inputs, 2 outputs (max.
24 VDC/24 VAC, 1 A)

RS-485

1 RS-485 (Half
duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)

Reset Key

Yes

Power Output

12 VDC,
max. 100 mA

Event

Basic Event

Motion detection (support alarm
triggering by specified target types (human
and vehicle)),video
tampering alarm, video quality diagnosis, exception (network disconnected, IP address conflict, illegal login, abnormal restart, HDD full,
HDD

error),vibration detection

Smart Event

scene change detection, audio exception detection, defocus detection

Linkage

Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger alarm

output, trigger recording, trigger capture, audible warning

Deep Learning Function

Multi-target-type Detection

Supports simultaneous detection and capture of human body,
face, and vehicle, Gets 7 face features,

Gets 13 human body
features, Gets 2 vehicle
features,

Supports counting the number of line crossing targets by type,
including human body,
non-motor vehicle, motor vehicle,

Supports dynamic
mosaic mask

Face Capture

Detects up to 120 faces simultaneously, captures up to 40 face
pictures per frame
simultaneously and uploads up to
10 face pictures per second,

Supports
swing left and right from -60° to 60°, tilt up and down from -30° to 30°, Uploads face with background and closed-up face pictures,

Supports best shot and quick shot
for capture mode,
Supports dynamic mosaic
mask,

Gets 7 face features

Face Comparison

Up to 10 face libraries. 30,000 faces for each library. 150,000 faces in total,

Supports
face library encryption

Perimeter Protection

Line crossing, intrusion, region entrance, region
exiting

Support alarm
triggering by specified target types (human
and vehicle) Support combined event alarm triggering

Metadata

Intrusion detection, line crossing detection, region entrance detection, region exiting

detection, face capture, multi-target-type detection

People Counting

Supports Multi-Dimension People
Counting,

Supports counting, displaying and exporting the people flow data of entering, exiting
and passing by (The data is stored in the flash.),

Supports
real-time uploading and uploading by statistic cycle, Supports generating daily,
weekly, monthly or annually reports,

Supports dynamic deduplication based on face picture
comparison, and can filter out the target
with the same
custom face pictures, same attributes, or filter out repeated invalid targets within the set time interval,

Supports
face feature deduplication,

Supports people
flow data replenishment

Queue Management

Supports
up to 8 detection regions, and independent arming schedule and linkage method

Supports
2 detection modes: regional people queuing-up, waiting time detection Generates reports to compare the
efficiency of different queuing-ups and display the changing status of one queue

Supports raw data export
for further analysis

Supports real-time data
uploading and scheduled data uploading

Regional people
queuing-up: supports 4 alarm trigger
conditions, including greater than threshold, less than threshold, equal to threshold, not
equal to threshold Waiting time
detection: supports 1 alarm trigger condition, including greater
than

threshold

Heat Map

A graphic
description of visits
(by calculating amount
of people or amount of dwell time)
in a configured area.,

Two report types are
available, space heat
map and time heat map line chart.

Hard Hat Detection

Detects up to 30 human
targets simultaneously

Supports
up to 4 shield regions

Regional People Counting

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports 3 detection modes:
people density detection, number of people
exception detection, waiting time exception
detection

Supports parameter settings: alarm times
per exception, alarm
interval, first alarm
delay

Supports searching real-time number of people

People density detection: supports scheduled uploading, number of people change
uploading, congestion level
uploading

Number of people exception detection: supports 6 alarm trigger
conditions, including greater than threshold A, less than
threshold A, equal to threshold A, not equal to threshold A, greater
than threshold A and less
than threshold B, less than threshold A or greater than threshold B (threshold A should be less
than threshold B)

Waiting
time exception detection: supports 3 alarm trigger conditions, including greater
than threshold A, less than threshold A, greater than threshold A and less than

threshold B (threshold A should be less than
threshold B)

On/Off Duty Detection

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports 2 detection modes:
absence detection, on/off
duty detection

Supports
parameter settings: person
on duty, absence duration

General

Power

12 VDC ± 25%, 0.97 A, max. 11.43
W, three-core terminal block, reverse polarity protection,

24 VAC ± 25%, 0.73
A, max. 10.67 W,

PoE: IEEE 802.3at, Type 2, Class
4, 42.5 V to 57 V, 0.19
A to 0.28 A, max.
11.92 W

Material

Base: metal, cover:
metal

Dimension

Ø144.3 mm × 114.1 mm (Ø5.7″ × 4.5″)

Package Dimension

244 mm × 174 mm × 173 mm (9.6″ × 6.9″ × 6.8″)

Weight

Approx. 990 g (2.0 lb.)

With Package Weight

Approx. 1425 g (3.1 lb.)

Storage Conditions

-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less
(non-condensing)

Startup and Operating

Conditions

With -H: -40 °C to 60 °C (-40 °F to 140
°F). Humidity 95% or
less (non-condensing),

Without
-H: -30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less
(non-condensing)

Language

33 languages: English, Russian, Estonian, Bulgarian,
Hungarian, Greek, German, Italian, Czech,
Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Danish,
Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese,

Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil), Ukrainian

General Function

Heartbeat, one-key
reset, mirror, password protection

Cable Length

0.25 m (0.8
ft.)

Device Management

Supports adding alarm
box (DS-FM2466) in the LAN to expand
6 additional input
and 6

output alarm interfaces

Approval

EMC

FCC: 47 CFR Part
15, Subpart B,

CE-EMC: EN 55032:
2015, EN 61000-3-2:2019, EN 61000-3-3: 2013+A1:2019, EN

50130-4:
2011 +A1: 2014,
EN50121-4,

RCM: AS/NZS
CISPR 32: 2015,
IC: ICES-003: Issue
7,

KC: KN32: 2015, KN35:
2015

Safety

UL: UL 62368-1,

CB: IEC 62368-1: 2014+A11,

CE-LVD: EN 62368-1: 2014/A11: 2017,

BIS: IS 13252
(Part 1): 2010/IEC 60950-1: 2005,

LOA: IEC/EN 60950-1

Environment

CE-RoHS: 2011/65/EU, WEEE:
2012/19/EU,

Reach: Regulation (EC) No 1907/2006

Protection

IP67: IEC 60529-2013,IK10: IEC 62262:2002

Anti-Corrosion
Protection

-Y: NEMA 4X (NEMA 250-2018)

CC

Common Criteria, Assurance Level: EAL2 + ALC_FLR.2

Other

PVC FREE