Camera

Image Sensor

1/1.8″ Progressive Scan CMOS

Max. Resolution

2688 × 1520

Min. Illumination

Color: 0.0003 Lux @ (F1.0,
AGC ON),B/W: 0.0001
Lux @ (F1.0, AGC ON),0 Lux with light

Shutter Time

1 s to 1/100,000 s

Day ＆ Night

IR cut filter

Blue glass module
to reduce ghost
phenomenon

Angle Adjustment

Pan: 0° to 355°, tilt:
0° to 85°, rotate: 0° to 355°

Lens

Focal Length
＆ FOV

2.8 to 12 mm, horizontal FOV 104.2° to 44.1°, vertical FOV 55.3° to 24.8°, diagonal FOV

126.8° to 51.1°

Focus

Auto, Semi-auto, Manual

Iris Type

P-iris

Aperture

F1.0 to F1.2

DORI

DORI

Wide: D
(Detect): 63.4 m, O (Observe): 25.2 m, R (Recognize): 12.7 m, I (Identify):
6.3 m

Tele: D (Detect): 140.7
m, O (Observe): 55.8 m, R (Recognize): 28.1
m, I (Identify): 14.1

m

Illuminator

Supplement Light
Range

2.8 to 12 mm: up to 30
m

Smart Supplement Light

Yes

IR Wavelength

850 nm

Supplement Light Type

Hybrid (IR and
White Light)

AI Open Platform

Model Specification

Up to 4 models,

Model type:
detection model, classification model,
mixed model (detection model and classification model)

Video

Main Stream

50 Hz:

25 fps (2688
× 1520, 2560 × 1440, 1920 × 1080, 1280 × 720)

50 fps (2560
× 1440, 1920
× 1080, 1280 × 720)

60 Hz:

30 fps (2688
× 1520, 2560 × 1440, 1920 × 1080,
1280 × 720)

60 fps (2560
× 1440, 1920
× 1080, 1280 × 720)

Sub-Stream

50 Hz: 25 fps
(704 × 576, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

Third Stream

50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576,
640 × 480)

60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480,
640 × 480)

Fourth Stream

50 Hz: 25 fps
(704 × 576, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

Fifth Stream

50 Hz: 25 fps (704 ×
576, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

SNR

≥ 52 dB

Image Enhancement

BLC,HLC,3D DNR ,Distortion Correction, Defog

Picture Overlay

LOGO picture can be overlaid on video with 128 × 128 24 bit bmp format.

Image Stabilization

EIS

Interface

Video Output

1 Vp-p Composite Output
(75 Ω/CVBS) (Only
for debugging)

Ethernet Interface

1 RJ45 10 M/100 M/1000
M self-adaptive Ethernet port

On-Board Storage

Built-in memory card
slot, support microSD/microSDHC/microSDXC card,
up to 1 TB

Built-in Microphone

Yes, 2 built-in microphones

Audio

1 input
(line in), 3.5 mm connector, three-contact, max. input
amplitude: 3.3 Vpp,
input impedance: 4.7 KΩ,
interface type: non-equilibrium,

1 output (line
out), 3.5 mm connector, three-contact, max. output amplitude: 3.3 Vpp,

output impedance: 100 Ω, interface type: non-equilibrium,
mono sound

Alarm

1 input, 1 output (max.
24 VDC, 1 A)

Built-in
Speaker

Max. power consumption: 1.5 W, max. sound pressure level: 98 dB, speaker range:
10

m

RS-485

1 RS-485 (Half
duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)

Reset Key

Yes

Power Output

12 VDC,
max. 100 mA

Event

Basic Event

Motion detection (support alarm
triggering by specified target types (human and vehicle)),video tampering alarm, exception (network disconnected, IP address conflict, illegal login, abnormal restart, HDD full,
HDD error),video quality diagnosis, vibration

detection

Smart Event

scene change detection, audio exception detection, defocus detection

Linkage

Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger alarm

output, trigger recording, trigger capture, audible warning

Deep Learning Function

Multi-target-type Detection

Supports simultaneous detection and capture of human body,
face, and vehicle, Gets 7 face features,

Gets 13 human body
features, Gets 2 vehicle
features,

Supports counting the number of line crossing targets by type,
including human body,
non-motor vehicle, motor vehicle,

Supports dynamic
mosaic mask

Face Capture

Detects up to 120
faces simultaneously, captures up to 40 face pictures per frame simultaneously and uploads up to 10 face pictures per
second,

Supports
swing left and right from -60° to 60°, tilt up and down from -30° to 30°, Uploads face with background and closed-up face pictures,

Supports best shot and quick shot
for capture mode,
Supports dynamic mosaic
mask,

Gets 7 face features

Face Comparison

Up to 10 face libraries. 30,000 faces for each library. 150,000 faces in total,

Supports
face library encryption

People Counting

Supports Multi-Dimension People
Counting,

Supports counting, displaying and exporting the people flow data of entering, exiting
and passing by (The data is stored in
the flash.),

Supports
real-time uploading and uploading by statistic cycle, Supports generating daily,
weekly, monthly or annually reports,

Supports dynamic deduplication based on face picture
comparison, and can filter out the target
with the same
custom face pictures, same attributes, or filter out repeated invalid targets within the set time interval,

Supports
face feature deduplication,

Supports people
flow data replenishment

Queue Management

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports
2 detection modes: regional people queuing-up, waiting time detection Generates reports to compare the
efficiency of different queuing-ups and display the changing status of one queue

Supports raw data
export for further
analysis

Supports
real-time data uploading and scheduled data
uploading

Regional people
queuing-up: supports 4 alarm trigger
conditions, including greater than threshold, less than threshold, equal to threshold, not
equal to threshold Waiting time
detection: supports 1 alarm trigger
condition, including greater than

threshold

Heat Map

A graphic
description of visits
(by calculating amount
of people or amount of dwell time)
in a configured area.,

Two report types are available, space
heat map and
time heat map
line chart.

Hard Hat Detection

Detects up to 30 human
targets simultaneously

Supports
up to 4 shield regions

Perimeter Protection

Line crossing, intrusion, region entrance, region
exiting

Support alarm
triggering by specified target types (human
and vehicle) Support combined event alarm triggering

Metadata

Intrusion detection, line crossing detection, region entrance detection, region exiting

detection, face capture, multi-target-type detection

Regional People Counting

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports 3 detection modes: people density detection, number
of people exception detection, waiting time
exception detection

Supports parameter settings: alarm times
per exception, alarm
interval, first alarm
delay

Supports searching real-time number of people

People density detection: supports scheduled uploading, number of people change
uploading, congestion level
uploading

Number of people exception detection: supports 6 alarm trigger
conditions, including greater than threshold A, less than
threshold A, equal to threshold A, not equal to threshold A, greater
than threshold A and less
than threshold B, less than threshold A or greater than threshold B (threshold A should be less
than threshold B)

Waiting
time exception detection: supports 3 alarm trigger conditions, including greater
than threshold A, less than threshold A, greater than threshold A and less than

threshold B (threshold A should be less than
threshold B)

On/Off Duty Detection

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports 2 detection modes: absence detection, on/off duty detection

Supports
parameter settings: person
on duty, absence duration

General

Power

12 VDC ± 20%, 2.01
A, max. 24.01
W, three-core terminal block;

24 VAC
± 20%, 1.51 A, max.
24.01 W, three-core terminal block;

PoE: IEEE 802.3at, Type 2, Class
4, 42.5 V to 57 V, 0.60
A to 0.44 A, max.
25.43 W

Material

Aluminum alloy body

Dimension

Ø160 mm × 159.5 mm (Ø6.3″ × 6.3″)

Package Dimension

251 mm × 215 mm × 189 mm (9.9″ × 8.5″ × 7.4″)

Weight

Approx. 2100 g (4.62 lb.)

With Package Weight

Approx. 2850 g (6.28 lb.)

Startup and Operating

Conditions

-40 °C to 60 °C (-40 °F to 140 °F). Humidity 95% or less
(non-condensing)

Storage Conditions

-40 °C to 60 °C (-40 °F to 140 °F). Humidity 95% or less
(non-condensing)

Language

33 languages: English, Russian, Estonian, Bulgarian,
Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch,
Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese,

Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil), Ukrainian

General Function

Heartbeat, anti-banding ,one-key reset, mirror, password protection, flash log

Heater

Yes

Device Management

Supports adding alarm
box (DS-FM2466) in the LAN to expand 6 additional input
and 6

output alarm interfaces

Approval

EMC

FCC: 47 CFR Part
15, Subpart B,

CE-EMC: EN 55032:
2015, EN 61000-3-2:2019, EN 61000-3-3: 2013+A1:2019, EN

50130-4:
2011 +A1: 2014,

RCM: AS/NZS
CISPR 32: 2015,
IC: ICES-003: Issue
7,

KC: KN32: 2015,
KN35: 2015

Safety

UL: UL 62368-1,

CB: IEC 62368-1: 2014+A11,

CE-LVD: EN 62368-1: 2014/A11: 2017,

BIS: IS 13252
(Part 1): 2010/IEC 60950-1: 2005,

LOA: IEC/EN 60950-1

Environment

CE-RoHS: 2011/65/EU, WEEE:
2012/19/EU,

Reach: Regulation (EC) No 1907/2006

Protection

IP67: IEC 60529-2013,IK10: IEC 62262:2002

Anti-Corrosion
Protection

-Y: NEMA 4X (NEMA 250-2018)

Automotive and Railway

EN50121-4

Other

PVC FREE