Hikvision IDS-2CD7046G0-AP 4MP Deepin View Varifocal Box IP Network Security Camera

Brand:Hikvision

5/5

Condition:New

$696.00

Out of stock

Out of stock

3901488

Free shipping

over $299

3years-warranty

Protecting Your Purchases

A Guide for Smart Shoppers

Description

 

Hikvision IDS-2CD7046G0-AP 4MP Deepin View Varifocal Box IP Network Security Camera

 

Monitor a room or hallway with the Deepin View iDS-2CD7046G0-AP 4MP Network Box Camera (No Lens) from Hikvision. Featuring a CS lens mount, this unit uses a 1/1.8″ progressive scan CMOS sensor to capture 2680 x 1520 resolution video at 60 fps. Two-way audio is possible thanks to a built-in microphone, along with an audio input and output. A memory card slot accepts microSD/SDHC/SDXC cards up to 256GB (available separately). Integrated PoE technology simplifies connectivity by enabling the transfer of power and data through a single cable.

 

This dome camera complies with ONVIF profiles G, S, and T, making it compatible with a wide range of surveillance devices.

Key Features:

  • IR cut filter for day and night functionality
  • CS lens mount
  • H.265+, H.265, H.264+, H.264, and MJPEG video compressions
  • Smooth streaming
  • Scalable Video Coding (SVC) for H.265/H.264 encoding
  • CBR and VBR
  • Target cropping
  • Image parameters switch
  • Picture overlay
  • 140 dB wide dynamic range
  • Image enhancements include; backlight compensation, highlight compensation, 3D-DNR, defog, electronic image stabilization, and distortion correction
  • Region of interest supports four fixed regions for each stream
  • General functions include; anti-flicker, five streams and up to five custom streams, ePTZ, heartbeat, mirror, privacy masks, flash log, password reset via email, and pixel counter
  • Up to 32 users with three host levels (admin, operator, and user)
  • Up to 20 channels in simultaneous live view
  • 1000M self-adaptive RJ45 Ethernet port
  • Self-adaptive RS-485 port
  • 2 x alarm inputs and 2 x alarm outputs
  • Audio input and output
  • Built-in microphone
  • Environment noise filtering
  • Compatible with Internet Explorer 8 or higher (plug-in required), Chrome 57 or higher, Firefox 52 or higher, Safari 11 or higher, iOS, Android, iVMS-4200, Hik-Connect, Hik Central
  • Online upgradeable
  • Dual backup
  • Hardware and software reset
  • Analytics include; motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal login, HDD full, HDD error), line crossing detection, intrusion detection, region entrance detection, region exiting detection, unattended baggage detection, object removal detection, scene change detection, audio exception detection, defocus detection, and counting

 

Specifications:

Camera

Image Sensor

1/1.8″ Progressive Scan CMOS

Max. Resolution

2688 × 1520

Min. Illumination

Color: 0.0005 Lux @ (F1.2,
AGC ON); B/W: 0.0001 Lux @ (F1.2,
AGC ON)

Shutter Time

1 s to 1/100,000 s

Day & Night

IR cut filter

Blue glass module
to reduce ghost
phenomenon

Lens

Lens Mount

CS mount

AI Open Platform

 

Model Specification

Up to 4 models,

Model type:
detection model, classification model,
mixed model (detection model and classification model)

Video

 

 

 

Main Stream

50 Hz:

25 fps (2688
× 1520, 2560 × 1440, 1920 × 1080,
1280 × 720)

50 fps (2560
× 1440, 1920
× 1080, 1280 × 720)

60 Hz:

30 fps (2688
× 1520, 2560 × 1440, 1920 × 1080,
1280 × 720)

60 fps (2560
× 1440, 1920
× 1080, 1280 × 720)

Sub-Stream

50 Hz: 25 fps
(704 × 480, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

Third Stream

50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 480,
640 × 480)

60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480,
640 × 480)

Fourth Stream

50 Hz: 25 fps
(704 × 480, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

Fifth Stream

50 Hz: 25 fps
(704 × 480, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

 

 

Video Compression

Main stream:
H.265+/H.265/H.264+/H.264, Sub-stream: H.265/H.264/MJPEG,

Third stream: H.265/H.264,

Fourth stream: H.265/H.264/MJPEG, Fifth
stream: H.265/H.264/MJPEG

Video Bit Rate

32 Kbps to 8 Mbps

H.264 Type

Baseline Profile, Main Profile, High Profile

H.265 Type

Main Profile

Bit Rate Control

CBR,VBR

Scalable Video Coding
(SVC)

H.264 and H.265
encoding

Region of Interest (ROI)

4 fixed regions for each stream

Target Cropping

Yes

e-PTZ

Support Patrol and
Auto Tracking settings

Audio

Audio Type

Mono sound

Audio Compression

G.711/G.722.1/G.726/MP2L2/PCM/MP3/AAC-LC

 

 

Audio Bit Rate

64 Kbps (G.711ulaw/G.711alaw)/16 Kbps (G.722.1)/16 Kbps
(G.726)/32 to 192
Kbps

(MP2L2)/8
to 320 Kbps
(MP3)/16 to 64 Kbps (AAC-LC)

Audio Sampling Rate

8 kHz/16 kHz/32
kHz/44.1 kHz/48 kHz

Environment Noise Filtering

Yes

Network

 

Protocols

TCP/IP, ICMP,
HTTP, HTTPS, FTP,
SFTP, SRTP, DHCP,
DNS, DDNS, RTP,
RTSP, RTCP, PPPoE, NTP, UPnP, SMTP,
SNMP, IGMP, 802.1X,
QoS, IPv4, IPv6, UDP, Bonjour,

SSL/TLS, WebSocket, WebSockets

Simultaneous Live View

Up to 20 channels

API

Open Network Video
Interface (Profile S, Profile G, Profile T, Profile M),ISAPI,SDK,ISUP

User/Host

Up to 32 users

3 user levels:
administrator, operator, and user

 

 

Security

Password protection, complicated password, HTTPS
encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter,
basic and digest authentication for
HTTP/HTTPS, WSSE and digest authentication for Open Network Video
Interface, RTP/RTSP OVER HTTPS, Control Timeout Settings, Security Audit Log,

TLS 1.2, TLS 1.3, TPM 2.0
(FIPS 140-2 level
2), AES128/256

 

Network Storage

NAS (NFS, SMB/CIFS),Auto Network Replenishment (ANR),

Together with
high-end Hikvision memory
card, memory card
encryption and health
detection are supported.

Client

iVMS-4200,Hik-Connect,Hik-Central

 

Web Browser

Plug-in required live
view: IE 10, IE 11,

Plug-in
free live view:
Chrome 57.0+, Firefox 52.0+, Edge 89+,
Safari 11+,

Local service: Chrome
57.0+, Firefox 52.0+, Edge
89+

Image

Image Parameters Switch

Yes

Image Settings

Rotate mode, saturation, brightness, contrast, sharpness,
white balance, and
AGC

adjustable
by client software or web browser

Day/Night Switch

Day, Night, Auto, Schedule, Alarm Trigger

Wide Dynamic Range
(WDR)

140 dB

SNR

≥ 52 dB

Image Enhancement

BLC,HLC,3D DNR, Distortion Correction, Defog

Privacy Mask

8 programmable polygon privacy masks

Image Stabilization

EIS

Picture Overlay

LOGO picture can be overlaid on video with 128 × 128 24 bit bmp format.

Interface

Video Output

1 Vp-p Composite Output
(75 Ω/CVBS) (Only
for debugging)

Ethernet Interface

1 RJ45 100 M/1000 M self-adaptive Ethernet port

On-Board Storage

Built-in memory card
slot, support microSD/microSDHC/microSDXC card,
up to 1 TB

Built-in Microphone

Yes,1 built-in microphone

Audio

1 input (line
in), 1 output
(line out), 3.5 mm connector

Alarm

2 inputs, 2 outputs (max.
24 VDC, 1 A)

RS-485

1 RS-485 (half
duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)

Reset Key

Yes

Power Output

12 VDC,
max. 100 mA

Fiber Optical

With /F11: 1 LC
fiber optical interface, SFP module, single
mode, 20 km transmission

distance,
1310 nm (TX)
and 1550 nm (RX), 155 Mbps transmission rate

Event

 

Basic Event

Motion detection (support alarm
triggering by specified target types (human and vehicle)),video tampering alarm, exception (network disconnected, IP address conflict,

illegal login, abnormal restart, HDD full,
HDD error),video quality diagnosis

Smart Event

scene change detection, audio exception detection, defocus detection

Linkage

Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger alarm

output, trigger recording, trigger capture, audible warning

Deep Learning Function

 

 

 

Multi-target-type
Detection

Supports simultaneous detection and capture of human body,
face, and vehicle, Gets 7 face features,

Gets 13 human body
features, Gets 2 vehicle
features,

Supports counting the number of line crossing targets by type,
including human body,
non-motor vehicle, motor vehicle,

Supports dynamic
mosaic mask

 

 

 

 

Face Capture

Detects up to 120 faces simultaneously, captures up to 40 face
pictures per frame
simultaneously and uploads up to
10 face pictures per second,

Supports
swing left and right from -60° to 60°, tilt up and down from -30° to 30°, Uploads face with background and closed-up face pictures,

Supports best shot and quick shot
for capture mode,
Supports dynamic mosaic
mask,

Gets 7 face features

Face Comparison

Up to 10 face libraries. 30,000 faces for each library. 150,000 faces in total,

Supports
face library encryption

 

Perimeter Protection

Line crossing, intrusion, region entrance, region
exiting

Support alarm
triggering by specified target types (human
and vehicle) Support combined event alarm triggering

 

 

 

 

 

People Counting

Supports Multi-Dimension People
Counting,

Supports counting, displaying and exporting the people flow
data of entering, exiting and passing by (The data is stored in the flash.),

Supports
real-time uploading and uploading by statistic cycle, Supports generating daily,
weekly, monthly or annually reports,

Supports dynamic deduplication based on face picture
comparison, and can filter out the target
with the same
custom face pictures, same attributes, or filter out repeated invalid targets within the set time interval,

Supports
face feature deduplication,

Supports people
flow data replenishment

 

 

 

 

 

 

 

 

Queue Management

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports
2 detection modes: regional people queuing-up, waiting time detection Generates reports to compare the
efficiency of different queuing-ups and display the changing status of one queue

Supports raw data export
for further analysis

Supports
real-time data uploading and scheduled data
uploading

Regional people
queuing-up: supports 4 alarm trigger
conditions, including greater than threshold, less than threshold, equal to threshold, not
equal to threshold Waiting time
detection: supports 1 alarm trigger
condition, including greater than

threshold

 

Heat Map

A graphic
description of visits
(by calculating amount
of people or amount of dwell time)
in a configured area.,

Two report types
are available, space
heat map and
time heat map
line chart.

Hard Hat Detection

Detects up to 30 human
targets simultaneously

Supports
up to 4 shield regions

Metadata

Intrusion detection, line crossing detection ,region entrance detection, region exiting

detection, face capture, multi-target-type detection

 

 

 

 

 

 

 

 

 

Regional People Counting

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports
3 detection modes: people density detection, number of people exception detection, waiting time exception detection

Supports parameter settings: alarm times
per exception, alarm
interval, first alarm
delay

Supports searching real-time number of people

People
density detection: supports scheduled uploading, number of people change uploading, congestion level uploading

Number of people exception detection: supports 6 alarm trigger
conditions, including greater than threshold A, less than
threshold A, equal to threshold A, not equal to threshold A, greater
than threshold A and less
than threshold B, less than threshold A or greater than threshold B (threshold A should be less
than threshold B)

Waiting time exception detection: supports 3 alarm trigger
conditions, including

greater than
threshold A, less than threshold A, greater than threshold A and less than threshold B (threshold A
should be less than threshold
B)

 

 

On/Off Duty Detection

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports 2 detection modes:
absence detection, on/off
duty detection

Supports
parameter settings: person
on duty, absence duration

General

 

 

 

 

Power

With F11:

12 VDC
± 20%, 0.95 A, max.
11.3 W, two-core terminal block

24 VAC
± 20%, 0.49 A, max.
11.6 W, two-core terminal block

PoE: IEEE 802.3af, Type 1, Class
3, 36 V to 57 V, 0.35
A to 0.22 A, max.
12.3 W

Without
/F11:

12 VDC
± 20%, 0.9 A, max.
10.8 W, two-core terminal block

24 VAC
± 20%, 0.44 A, max.
10.4 W, two-core terminal block

PoE: IEEE 802.3af, Type 1, Class
3, 36 V to 57 V, 0.33 A to 0.21
A, max. 11.6
W

 

Material

Aluminum alloy body

Dimension

142.5 mm × 69.8 mm × 68 mm (5.61″ × 2.75″ × 2.68″)

Package Dimension

315 mm × 140 mm × 140 mm (12.4″ × 5.51″ × 5.51″)

Weight

Approx. 730 g (1.96 lb.)

With Package Weight

Approx. 1115 g (2.99 lb.)

Storage Conditions

-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less
(non-condensing)

Startup and Operating

Conditions

-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less
(non-condensing)

 

 

Language

33 languages: English, Russian, Estonian, Bulgarian,
Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch,
Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese,

Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil), Ukrainian

General Function

Heartbeat, mirror, password protection, one-key reset

Device Management

Supports adding alarm
box (DS-FM2466) in the LAN to expand
6 additional input
and 6

output alarm interfaces

Approval

 

 

 

EMC

FCC: 47 CFR Part
15, Subpart B,

CE-EMC: EN 55032:
2015, EN 61000-3-2:2019, EN 61000-3-3: 2013+A1:2019, EN

50130-4:
2011 +A1: 2014,

RCM: AS/NZS
CISPR 32: 2015,
IC: ICES-003: Issue
7,

KC: KN32: 2015,
KN35: 2015

 

 

Safety

UL: UL 62368-1,

CB: IEC 62368-1: 2014+A11,

CE-LVD: EN 62368-1: 2014/A11: 2017,

BIS: IS 13252
(Part 1): 2010/IEC 60950-1: 2005,

LOA: IEC/EN 60950-1

 

Environment

CE-RoHS: 2011/65/EU, WEEE:
2012/19/EU,

Reach: Regulation (EC) No 1907/2006

CC

Common Criteria, Assurance Level: EAL2 + ALC_FLR.2

 

 

Compatible Products