Hikvision IDS-2CD7A45G0-IZHSY 4.7-118MM 4MP IP67 Bullet IP Network Security Camera

Camera

Image Sensor

1/2.5″ Progressive Scan CMOS

Max. Resolution

2688 × 1520

Min. Illumination

Color: 0.009 Lux @ (F1.6,
AGC ON), B/W:
0.0018 Lux @ (F1.6, AGC ON), 0 Lux with IR

Shutter Time

1 s to 1/30,000 s

Day ＆ Night

IR cut filter

Angle Adjustment

Pan: 0° to 355°, tilt:
0° to 90°, rotate: 0° to 360°

Lens

Focal Length ＆ FOV

4.7 to 118 mm, horizontal FOV
58° to 2.8°,
vertical FOV 32.3°
to 1.6°, diagonal FOV 63°

to 3°

Focus

Auto, Semi-auto, Manual

Iris Type

P-iris

Aperture

4.7 to 118 mm: F1.6
to F3.8

DORI

DORI

Wide: D (Detect): 106 m,
O (Observe): 42.1 m, R (Recognize): 21.2
m, I (Identify): 10.6 m

Tele: D (Detect): 2200
m, O (Observe): 873 m, R (Recognize): 440 m, I (Identify): 220 m

Illuminator

Supplement Light
Type

IR

Supplement Light Range

Up to 200 m

Smart Supplement Light

Yes

IR Wavelength

850 nm

AI Open Platform

Model Specification

Up to 4 models,

Model type:
detection model, classification model, mixed model (detection model and classification model)

Video

Main Stream

50 Hz:

25 fps (2688
× 1520, 2560 × 1440, 1920 × 1080,
1280 × 720)

50 fps (2560
× 1440, 1920
× 1080, 1280 × 720)

60 Hz:

30 fps (2688
× 1520, 2560 × 1440, 1920 × 1080,
1280 × 720)

60 fps (2560
× 1440, 1920
× 1080, 1280 × 720)

Sub-Stream

50 Hz: 25 fps
(704 × 576, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

Third Stream

50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576,
640 × 480)

60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480,
640 × 480)

Fourth Stream

50 Hz: 25 fps
(704 × 576, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

Fifth Stream

50 Hz: 25 fps
(704 × 576, 640 × 480)

60 Hz: 30 fps
(704 × 480, 640 × 480)

Image Enhancement

BLC,HLC,3D DNR,
Distortion Correction, Defog

SNR

≥ 52 dB

Privacy Mask

8 programmable polygon privacy masks

Picture Overlay

LOGO picture can be overlaid on video with 128 × 128 24 bit bmp format.

Image Stabilization

EIS (Built-in gyroscope to improve EIS performance)

Interface

Video Output

1 Vp-p Composite Output
(75 Ω/CVBS) (Only
for debugging)

Ethernet Interface

1 RJ45 10 M/100 M/1000
M self-adaptive Ethernet port

On-Board Storage

Built-in memory card
slot, support microSD/microSDHC/microSDXC card,
up to 1 TB

Audio

1 input (line
in), 3.5 mm connector, max.
input amplitude: 3.3 Vpp,
input impedance:

4.7 KΩ, interface type: non-equilibrium,

1 output (line out), 3.5
mm connector, max. output amplitude: 3.3 Vpp, output impedance: 100 Ω, interface type: non-equilibrium

Alarm

2 inputs, 2 outputs (max.
24 VDC, 1 A)

RS-485

-Y: 1 RS-485
(Half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)

Reset Key

Yes

Power Output

-Y: 12 VDC, max. 100
mA

Event

Basic Event

Motion detection (support alarm
triggering by specified target types (human and vehicle)),video tampering alarm, exception (network disconnected, IP address conflict, illegal login, abnormal restart, HDD full,
HDD error),video quality
diagnosis, vibration

detection

Smart Event

scene change detection, audio exception detection,
defocus detection

Linkage

Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger alarm

output, trigger recording, trigger capture

Deep Learning Function

Multi-target-type Detection

Supports simultaneous detection and capture of human body,
face, and vehicle, Gets 7 face features,

Gets 13 human body
features, Gets 2 vehicle
features,

Supports
counting the number of line crossing targets by type, including human body, non-motor vehicle, motor vehicle,

Supports dynamic mosaic mask

Face Capture

Detects up to 120 faces simultaneously, captures up to 40 face
pictures per frame
simultaneously and uploads up to
10 face pictures per second,

Supports
swing left and right from -60° to 60°, tilt up and down from -30° to 30°, Uploads face with background and closed-up face pictures,

Supports best shot and quick shot
for capture mode,
Supports dynamic mosaic
mask,

Gets 7 face features

Face Comparison

Up to 10 face libraries. 30,000 faces for each library. 150,000 faces in total,

Supports
face library encryption

People Counting

Supports Multi-Dimension People
Counting,

Supports counting, displaying and exporting the people flow data of entering, exiting
and passing by (The data is stored in
the flash.),

Supports
real-time uploading and uploading by statistic cycle, Supports generating daily,
weekly, monthly or annually reports,

Supports dynamic deduplication based on face picture
comparison, and can filter out the target
with the same
custom face pictures, same attributes, or filter out repeated invalid targets within the set time interval,

Supports
face feature deduplication,

Supports people
flow data replenishment

Queue Management

Supports up to 8 detection regions, and independent arming schedule and linkage method

Supports
2 detection modes: regional people queuing-up, waiting time detection Generates reports to compare the
efficiency of different queuing-ups and display the changing status of one queue

Supports raw data
export for further analysis

Supports
real-time data uploading and scheduled data
uploading

Regional people
queuing-up: supports 4 alarm trigger
conditions, including greater than threshold, less than threshold, equal to threshold, not
equal to threshold Waiting time
detection: supports 1 alarm trigger
condition, including greater than

threshold

Heat Map

A graphic
description of visits
(by calculating amount
of people or amount of dwell time)
in a configured area.,

Two report types are available, space
heat map and time heat map line chart.

Hard Hat Detection

Detects up to 30 human
targets simultaneously

Supports
up to 4 shield regions

Perimeter Protection

Line crossing, intrusion, region entrance, region
exiting

Support alarm
triggering by specified target types (human and vehicle) Support combined event alarm triggering

Metadata

Intrusion detection,
line crossing detection, region entrance detection,
region exiting

detection, face capture, multi-target-type
detection

Regional People Counting

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports 3 detection modes:
people density detection, number of people
exception detection, waiting time exception
detection

Supports parameter settings: alarm times
per exception, alarm
interval, first alarm
delay

Supports searching real-time number of people

People density detection: supports scheduled uploading, number of people change
uploading, congestion level
uploading

Number of
people exception detection: supports 6 alarm trigger conditions, including greater than threshold A, less than
threshold A, equal to threshold A, not equal to threshold A, greater
than threshold A and less than threshold B, less than
threshold A or greater than threshold B (threshold A should be less than threshold B)

Waiting
time exception detection: supports 3 alarm trigger conditions, including greater
than threshold A, less than threshold A, greater than threshold A and less than

threshold B (threshold A should be less than
threshold B)

On/Off Duty Detection

Supports up to 8 detection regions, and independent arming
schedule and linkage method

Supports 2 detection modes: absence detection, on/off duty detection

Supports
parameter settings: person
on duty, absence duration

General

Power

-IZHSY:

12 VDC
± 20%, 1.73 A, max.
20.7 W, three-core terminal block

24 VAC
± 20%, 1.31 A, max.
19.9 W, three-core terminal block

PoE: IEEE 802.3at, Type 2, Class
4, 42.5 V to 57 V, 0.46
A to 0.35 A, max.
19.5 W

-IZHS:

12 VDC
± 20%, 1.62 A, max.
19.4 W, two-core terminal block

24 VAC
± 20%, 1.21 A, max.
18.7 W, two-core terminal block

PoE: IEEE 802.3at, Type 2, Class
4, 42.5 V to 57 V, 0.43
A to 0.32 A, max.
18.2 W

-IZSY:

12 VDC
± 20%, 1.13 A, max.
13.48 W, three-core terminal block

24 VAC
± 20%, 0.89 A, max. 12.14
W, three-core terminal block

PoE: IEEE 802.3at, Type 2, Class
4, 42.5 V to 57 V, 0.22
A to 0.29 A, max.
12.29 W

-IZS:

12 VDC
± 20%, 1.02 A, max.
12.22 W, two-core terminal block

24 VAC
± 20%, 0.8 A, max.
11.49 W, two-core terminal block

PoE: IEEE 802.3at, Type 2, Class
4, 42.5 V to 57 V, 0.20
A to 0.26 A, max.
10.50 W

Material

Aluminum alloy body

Dimension

With -Y: Ø140 mm × 378.4 mm (Ø5.5″ × 14.9″)

Without -Y: Ø144.1 mm × 375.2 mm (Ø5.7″ × 14.8″)

Package Dimension

425 mm × 190 mm × 180 mm
(16.7″ × 7.5″ × 7.1″)

Weight

With -Y: Approx. 2160 g (4.8
lb.)

Without -Y: Approx. 2130 g (4.7
lb.)

With Package Weight

With -Y: Approx. 3310 g (7.3
lb.)

Without -Y: Approx. 3200 g (7.1
lb.)

Storage Conditions

-40 °C to 60 °C (-40 °F to 140 °F). Humidity 95% or less
(non-condensing)

Startup and Operating

Conditions

Without -H: -30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less
(non-condensing)

With -H: -40 °C to 60 °C (-40 °F to 140 °F). Humidity 95% or less
(non-condensing)

Language

33 languages: English, Russian, Estonian, Bulgarian,
Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch,
Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean,
Traditional Chinese,

Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil), Ukrainian

General Function

Heartbeat, mirror, flash
log, password reset
via email, pixel counter

Heater

With -H: Yes

De-icing

Yes

Device Management

Supports adding alarm
box (DS-FM2466) in the LAN to expand 6 additional input
and 6

output alarm interfaces